Pemberley Blue - Annie Sloan Satin Paint 750ml

FREEZE WARNING

We take great care to pack your paint appropriately during winter freeze months and  delivery locations, HOWEVER… It is ultimately the customers responsibility to monitor their deliveries and bring them inside out of the weather.  As a Reminder our    policy is no returns or refunds on any paint products

Annie Sloan Satin Paint in Pemberley Blue is a refined and elegant pastel blue, inspired by the eggshell blue so often used in manor houses during the illustrious Regency period. This blue maximizes space because of its recessive qualities; whilst a generous helping of green and white pigment warm up and soften the blue

Satin Paint: 25 floz is enough to cover approximately 118.4 square ft. 

Annie Sloan Satin Paint will give a robust yet beautiful soft-sheen finish on any internal wooden or metallic surface. It has been specially formulated to be easy to apply and contains self-levelling properties to give a modern look. Annie Sloan Satin Paint is child friendly, low VOC, and easy to clean. All 14 colours are matched to the Annie Sloan Wall Paint range.

• Keep in mind, if you’re painting over a dark colour, you may require further coverage to achieve desired opacity

• Porous surfaces such as brick may also require additional coats. This should be factored in when considering your quantity.

• PREP-All surfaces must be clean, dry, and free from any dust, debris or oil based contaminants. We advise using a gentle water-based detergent to thoroughly clean. 

• METAL PREP-Thoroughly sand the surface, clean, and degrease any unpainted metal surfaces. Previously painted metal surfaces should be sanded back to ensure the removal of any loose or flaking paint. Specialist primers should be used to ensure longevity of Annie Sloan Satin Paint and to protect the metal underneath.

• RECOMMENDED APPLICATION BY BRUSH-Apply a reasonably thick coat of Annie Sloan Satin Paint using a high quality fine tipped synthetic bristled brush (eg Annie Sloan Flat Brushes). Apply the paint in one direction (i.e vertically) and then the other (i.e horizontally) using a cross-hatch technique to achieve the desired coverage. Avoid overworking the paint, as this will cause the paint to degrade. Full coverage should be achieved after 2 coats, although a third may be necessary if making a dramatic colour change.

• CLEAN UP-  For best results, clean brushes or rollers by removing as much paint as possible before ending use. Then clean thoroughly with warm soapy water and pat dry using a microfiber cloth.

• STORAGE- Store in a cool dry place. Avoid extreme temperatures both low and high and avoid freezing and exposure to frost. To maximize shelf life decant used tins that are less than half full into smaller, tightly sealed containers. For best results use within 6 months of purchase.