Skip to product information
    1 of 1

    Fusion Stain and Finishing Oil (SFO) - Driftwood 32oz

    Fusion Stain and Finishing Oil (SFO) - Driftwood 32oz

    Regular price $55.99
    Regular price $89.99 Sale price $55.99
    Sale Sold Out
    Shipping calculated at checkout.

    Fusion's Stain & Finishing Oil (SFO) All in One does just as it says! It add color, and adds a sealing oil at the same time!  This stain & top coat combo offers exceptional durability in high traffic areas like table tops, kitchen cabinets and even flooring.  Can be used on bare wood, or over previously painted surfaces for a faux effect. Use the Natural color over Fusion Mineral Paint colors to increase the sheen and offer superior durability. 

    Fusion Stain & Finishing Oil All in One Wood Finish is Eco Friendly and easy to use.  This stain & top coat combo offers exceptional durability in high traffic areas like table tops, kitchen cabinets and even flooring. 

    Can be used on bare wood, or over previously painted surfaces for a faux effect. Use the Natural color over Fusion Mineral Paint colors to increase the sheen and offer superior durability, please keep in mind that all oil based products typically yellow in time. Using this over top of a white paint, will cause a slight yellowing effect.

    This Stain and Finishing Oil All in One is your go to solution to bare wood to show off the grain, yet change the colour to your desire. Comes in 6 gorgeous colours.

    Very easy to use, low odour and Eco Friendly! Apply it with a brush, or rag, and wipe away the excess.

    With a combination of natural oils and resins that penetrate into the wood fibers to create a durable, scratch resistant and waterproof finish. It does not leave a surface film that sits on top, rather it soaks in and becomes part of your wood. It is ideal for wooden table tops as it has excellent resistance to abrasions and can be washed over and over again! With a combination of natural oils and resins that penetrate into the wood fibers to create a durable, scratch resistant and waterproof finish. It does not leave a surface film that sits on top, rather it soaks in and becomes part of your wood. It is ideal for wooden table tops as it has excellent resistance to abrasions and can be washed over and over again!

    Our Stain & Finishing Oil is composed of plant products, Safflower oil, Tung oil, Linseed oil, Vegetable wax, safe odorless mineral solvent and cobalt free siccative which means effective drying without toxic cobalt dryers while being low odour in comparison to traditional solvent based stains.

    Coverage. This is a highly concentrated oil blend so a little will go a long way!  One container covers 40-75 sq. ft. depending on wood density.  This container will cover what 1 Litre of comparable stains do on the market giving you 2 to 3 times more coverage than any water-based stains.

    How to use.  Stir, do not shake, before application. Sand the wood evenly with 100-120 grit sandpaper. Remove dust with a vacuum or lint-free-rag. Apply evenly using a brush or Fusion Applicator Pads. On raw wood, remove excess after 15-20 minutes. On Fusion surfaces, remove excess immediate.  Re-coat after 9 hours, as any earlier will reactivate the stain. More coats increases durability, opacity, and sheen. Dry to the touch after approximately 9 hours. Ready for normal use after approximately 3 days. Cure time is 10 days, after which the surface can be cleaned with soap and water.

    Cleanup.  Spills and tools should be cleaned with mineral spirits.

    Application Tool  Brush, lint free rag, applicator pad
    Location  Interior/Exterior
    Re-coat Time  9 hrs
    Top Coat  No additional top coat is required.- this is made strong enough for floors and table tops. However you may use wax or "Natural" colour Stain & Finishing Oil to increase the sheen but not deepen the colour. 
    Clean Up  Odourless Solvent 
    Coverage  40-75 sq.ft. 
    Finish/Sheen  Matte to high sheen. Each additional layer and buffing increases the sheen. 
    Recommended Uses   Reclaimed wood, bare wood, table tops, floors, most any surface, painted finish or Milk Painted pieces. 
    Can Be Applied To   Use as a stain over raw or well-sanded wood; apply over painted surface for added sheen, glaze effect, or added protection; seal milk paint or other porous paint. Not recommended over light colours as it will yellow.
    Can Be Painted Over  Once dried if over bare wood and only 1 coat applied, 10 days after for multiple coats applied . Test to ensure prior to tackling a full project.
    How to Prep  Apply over any surface or top coat for desired effect except wax.
    Cure Time  10 Days
    Maintenance/ Cleaning  Light cleaners, as they will strip away the natural oil.

     

    View full details